THE Gear Locker (Plate Carrier Hanger)

For Harbor Freight (US General 22" end locker) ONLY

The Plate Carrier Hanger really ties THE Gear Locker together, especially when paired with the Helmet Hanger

• Holds 1 plate carrier securely (full weight with ballistic plates) Pictured is a TREX Arms AC UNO (IYKYK) with HESCO L210's
• Adjustable opening width (trim dowel rods to desired size)
• Uses pins (included) to align and hold in place 
• Uses 2 bolts (included) per side to bear the weight
  

We do not include the dowel rod! You will need to source your dowel rods from Home Depot or other hardware store. The size that you must use is 3/4" wooden dowel rod. These rods can be cut down to the length you prefer. Find a balance between holding the plate carrier securely and allowing for an easy mount/ dismount.  Home Depot will cut them for you in store if you ask! 

• You can paint your dowel rods if you'd like! Do some light sanding first and use a light coat, painting the rods too thick can make them difficult to insert into the mounts 

The included pins are inserted into the base on one end and pushed into the precut holes in the locker frame (with considerable force) on the other end. Then the bolts and washers are secured through the frame of the locker (bolts will extend from the back of the locker slightly) 

Please note that some products  may have small imperfections or visible seams since 3D printing is not perfect and seams are a natural occurrence as the nozzle changes direction between layers. Products may also very slightly from product photos as I improve on the designs and release newer and better iterations. 

Material: Additive manufacturing with PLA CF (this is not a high temp material and should not be stored in direct sunlight). 

Warranty: If an item breaks and falls within our warranty/ replacement policies, reach out to me at 111fathoms@gmail.com  with your order number and pictures and I will get a replacement or refund sent to you ASAP.