THE Universal Holster
THE Universal Holster
Couldn't load pickup availability
One holster for all of your firearms, no more bins of holsters taking up the space under your desk or clogging up your safe. THE Universal Holster can hold either a P365 or a Walther PDP and almost everything in between all with the turn of a screw.
Colors: No matter what color you select for your holster, the Wings, height adjusters, bridges, and Over Hooks will be produced in BLACK only. Color selection refers to your holster body and mag carrier body.
DISCLAIMER: This holster works with a lot of guns but we must confirm fitment first to be positive. We are testing as many firearms as we can, just to be safe, we CANNOT guarantee fitment until we have personally tested a firearm. If it is not on the list, we haven't had a chance to test that gun yet but we will get to it as soon as we can. Scroll to the bottom of this page for our current fitment list!
Universal Holsters: Please understand that a universal design must be able to fit the largest option and the smallest option at the same time. With that in mind, please be aware that a firearm as large as a PDP or Glock will fit in the holster very well. But a SIG 365 or Shield X will have some open space on either side of the trigger guard which will allow the frame to rotate slightly (up and down). The firearm still locks into place, the trigger is still protected, and the slide does not have any room to move. Just the trigger guard/frame is able to pivot.
Sizing: We offer one model of the holster but three different lengths. G19 length, G17 length, and G34 length, use those barrel lengths to reference which option would be best suited for the barrel lengths of the firearms that you will be using.
Hand orientation: If you shoot right-handed always select right hand for everything, including mag carriers.
If you shoot left-handed always select left hand for everything, including mag carriers.
Retention: If this holster is 3D printed, won't it just lose all of its retention after a month? NO it will not lose its retention! While 90% of this holster is 3D printed, the important parts are not! The retention is achieved with an adjustable MRD device. This allows you to very accurately adjust the retention to your liking, provides long lasting retention, and also allows you to renew your retention if it is ever needed. In the unlikely event that your MRD wears out or breaks, you can simply replace that part for $10 rather than the traditional route of replacing an entire Kydex holster just because your retention bump is worn down.
Why nothing smaller? If your holster fits small guns, why don't you offer a holster that's shorter than G19 length? You've all heard a new shooters surprise when you tell them that the big scary pistol is actually a lot easier to shoot than the small pink one. Same caliber, but half the size and half the weight, of course it has more recoil. Its kind of the same thing here, you might think the smaller holster would conceal better but, its the opposite. You still have the same goal (hide the gun) same problem (the gun wants to print). So what happens if you have a short holster? There isn't anything to keep it from spilling over your beltline, the weight is all at the top of the belt instead of below it so, the longer holster length puts the lever arm down low and prevents the top of the holster from spilling out over your belt and into your shirt. Thus preventing printing.
Included: The base holster will come preassembled and ready to use out of the box, just adjust your retention and you are good to go! You can add on additional items to build out your holster if so desired, listed below is what comes with your order regardless of any add ons that you may wish to purchase.
- Holster
- (2) over hooks (1.5" or 1.75")
- (2) wings (normal and tall)
- One mini dry fire target! Start training right away!
Additional components: You can add on items to your holster, such as a sidecar setup with spare magazine carrier or a bridge to space out one of your overhooks for a more stable setup that keeps the gun locked into the same place on your belt line. Listed below is each add on item that you can select from and what is include.
-
Sidecar Mag Carrier: Bridge (attaches mag carrier to holster) Mag carrier (select single stack or double stack) Mini hook (for mag carrier only, holsters will still include a full size hook to replace the mag carrier if you want to change it later).
- Offset Bridge: Bridge (attaches to your holster and spaces out one of your overhooks for a more stable platform) Hardware (optional)
- Mag carrier bridge: Bridge (attaches a mag carrier and holster together, also provides a wider more stable platform for your belt to grab onto) Hardware (optional)
- Spare over hooks: You can always add on additional hooks
Please note that some products may have small imperfections or visible seams since 3D printing is not perfect and seams are a natural occurrence as the nozzle changes direction between layers. Products may also very slightly from product photos as I improve on the designs and release newer and better iterations.
Material: Additive manufacturing with PETG (holster / mag carrier) PCTG (over hooks) PAHT-CF (bridges)
Warranty: If an item breaks and falls within our warranty/ replacement policies, reach out to me at 111fathoms@gmail.com with your order number and pictures and I will get a replacement or refund sent to you ASAP.
FITMENT LIST:
Green: No issues present during testing
Yellow: Some rotational play in the trigger guard area. Common in Universal Holsters that must accommodate the largest and smallest guns at the same time. Does NOT present a safety risk
Orange: Trigger guard is partially exposed, and the rear of the trigger is visible. Trigger face is covered and the only possible chance of a discharge would be if an item was intentionally inserted into the opening and the material was flexed away with force.
Red: Firearm is not compatible

